Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass.

This review presents the advances in polymeric materials achieved by extrusion and injection molding from lignocellulosic agroindustrial biomass. Biomass, which is derived from agricultural and industrial waste, is a renewable and abundant feedstock that contains mainly cellulose, hemicellulose, and lignin. To improve the properties and functions of polymeric materials, cellulose is subjected to a variety of modifications. The most common modifications are surface modification, grafting, chemical procedures, and molecule chemical grafting. Injection molding and extrusion technologies are crucial in shaping and manufacturing polymer composites, with precise control over the process and material selection. Furthermore, injection molding involves four phases: plasticization, injection, cooling, and ejection, with a focus on energy efficiency. Fundamental aspects of an injection molding machine, such as the motor, hopper, heating units, nozzle, and clamping unit, are discussed. Extrusion technology, commonly used as a preliminary step to injection molding, presents challenges regarding fiber reinforcement and stress accumulation, while lignin-based polymeric materials are challenging due to their hydrophobicity. The diverse applications of these biodegradable materials include automotive industries, construction, food packaging, and various consumer goods. Polymeric materials are positioned to offer even bigger contributions to sustainable and eco-friendly solutions in the future, as research and development continues.

Effect of Potassium Permanganate as an Ethylene Scavenger and Physicochemical Characterization during the Shelf Life of Fresh Banana (Musa paradisiaca).

The conventional method of employing low temperatures for storage and distribution has long been the standard approach for preserving most fruits and vegetables. This practice is likewise prevalent in the retail industry, which relies on similar methods for transporting and maintaining the quality of perishable products on their shelves. The aim was to preserve bananas (Musa paradisiaca) using an ethylene scavenger, potassium permanganate, which is contained in small paper bags, to increase the storage and distribution time at low cost. The bananas were distributed in four plastic containers at a temperature of 23°C, three of the treatments contained different concentrations of potassium permanganate, and one was potassium permanganate free. The experimental period was 19 days, and the variations in weight loss, pH, titratable acidity, texture, color, and total soluble solids were analyzed. Potassium permanganate effectively reduced the changes in their physiological ripening.

Encapsulation of Bioactive Compounds for Food and Agricultural Applications.

This review presents an updated scenario of findings and evolutions of encapsulation of bioactive compounds for food and agricultural applications. Many polymers have been reported as encapsulated agents, such as sodium alginate, gum Arabic, chitosan, cellulose and carboxymethylcellulose, pectin, Shellac, xanthan gum, zein, pullulan, maltodextrin, whey protein, galactomannan, modified starch, polycaprolactone, and sodium caseinate. The main encapsulation methods investigated in the study include both physical and chemical ones, such as freeze-drying, spray-drying, extrusion, coacervation, complexation, and supercritical anti-solvent drying. Consequently, in the food area, bioactive peptides, vitamins, essential oils, caffeine, plant extracts, fatty acids, flavonoids, carotenoids, and terpenes are the main compounds encapsulated. In the agricultural area, essential oils, lipids, phytotoxins, medicines, vaccines, hemoglobin, and microbial metabolites are the main compounds encapsulated. Most scientific investigations have one or more objectives, such as to improve the stability of formulated systems, increase the release time, retain and protect active properties, reduce lipid oxidation, maintain organoleptic properties, and present bioactivities even in extreme thermal, radiation, and pH conditions. Considering the increasing worldwide interest for biomolecules in modern and sustainable agriculture, encapsulation can be efficient for the formulation of biofungicides, biopesticides, bioherbicides, and biofertilizers. With this review, it is inferred that the current scenario indicates evolutions in the production methods by increasing the scales and the techno-economic feasibilities. The Technology Readiness Level (TRL) for most of the encapsulation methods is going beyond TRL 6, in which the knowledge gathered allows for having a functional prototype or a representative model of the encapsulation technologies presented in this review.

Production of Protein Hydrolysate from Quinoa (Chenopodium quinoa Willd.): Economic and Experimental Evaluation of Two Pretreatments Using Supercritical Fluids' Extraction and Conventional Solvent Extraction.

Supercritical fluids' extraction (SFE) and conventional solvent extraction (CSE) for defatting of quinoa flour as pretreatments to produce the quinoa protein hydrolysate (QPH) were studied. The objective was to extract the oil and separate the phenolic compounds (PC) and the defatted quinoa flour for subsequent quinoa protein extraction and enzymatic hydrolysis. The oil extraction yield (OEY), total flavonoid content (TFC), and QPH yield were compared. SuperPro Designer 9.0® software was used to estimate the cost of manufacturing (COM), productivity, and net present value (NPV) on laboratory and industrial scales. SFE allows higher OEY and separation of PC. The SFE oil showed a higher OEY (99.70%), higher antioxidant activity (34.28 mg GAE/100 g), higher QPH yield (197.12%), lower COM (US$ 90.10/kg), and higher NPV (US$ 205,006,000) as compared to CSE (with 77.59%, 160.52%, US$ 109.29/kg, and US$ 28,159,000, respectively). The sensitivity analysis showed that the sale of by-products improves the economic results: at the industrial scale, no significant differences were found, and both processes are economically feasible. However, results indicate that SFE allows the recovery of an oil and QPH of better nutritional quality and a high level of purity-free organic solvents for further health and nutraceutical uses.

Effect of pretreatment by supercritical fluids on antioxidant activity of protein hydrolyzate from quinoa (Chenopodium quinoa Willd.).

The effect of two pretreatments on the antioxidant activity was evaluated in quinoa protein hydrolysate, using supercritical CO2 extraction and ethanol as cosolvent, this type of pretreatment was compared to a conventional petroleum ether extraction method without recovery of bioactive compounds. The extractions were carried out at a temperature of 55°C and a pressure of 23 MPa using ethanol (7-8 g quinoa/100 ml); the CO2 mass flow was 35 g/min, the extraction time was 240 min and the particle size was 500 µm, enzyme COROLASE® 7089 was applied for enzymatic hydrolysis, finally ABTS test assessed antioxidant activity. A significant effect was found on the degree of hydrolysis (23.93%) and antioxidant activity (1,181.64 µmol TE/g protein) compared to a conventional method (24.33%) and (1,448.84 µmol TE/g protein). In conclusion, our results suggest that the use of supercritical CO2 and the addition of ethanol as cosolvent are the interesting green technology, to recovery oil and separate phenolic compounds prior to enzymatic hydrolysis to avoid interference with biological activities from quinoa protein hydrolysates, and shows highest antioxidant activity to be incorporate in food products.

Phytochemical screening and DPPH radical scavenging activity of three morphotypes of Mauritia flexuosa L.f. from Peru, and thermal stability of a milk-based beverage enriched with carotenoids from these fruits.

Mauritia flexuosa L.f. is a palm tree which presents great morphological variability (morphotypes), represented mainly by the mesocarp color of its fruits. The objective of the study was to characterize the physicochemical and antioxidant properties of three morphotypes of Mauritia flexuosa L.f. ("Yellow", "Colour" and "Shambo") of greater economic importance in the Peruvian Amazon. "Shambo" showed a significantly high content of bioactive compounds (total phenolics, flavonoids and carotenoids) and DPPH radical scavenging activity compared to the "Yellow" and "Colour" morphotypes (p ≤ 0.05). There was a significant correlation between DPPH radical scavenging activity and total phenolics, flavonoids and carotenoids (p ≤ 0.01). Furthermore, milk-based beverages enriched with carotenoids of those morphotypes of Mauritia flexuosa L.f. have been shown to be a good source of bioactive compounds for use in the food industry. The milk-based beverages enriched with carotenoids of those morphotypes of Mauritia flexuosa L.f. showed higher lightness (L∗) and yellowness (b∗).